Airtec's intercooler upgrade for the Mazda mps has proved to be a great upgrade for any re-mapped cars.
The 70mm thick core has been rolling road tested to bring down inlet temperatures from 116 degree's to 39 degree's. That's a 77 degree reduction in intake temperature's!
consisting of full 60mm boost pipe kit including high quality silicone hoses
No cutting to the bumper needed.
AIRTEC part number: ATINTMAZ01
Airtec Part No: ATINTMAZ01
From £449.00 (inc VAT)
£374.17 (exc VAT)
 
TECHNICAL DATA
 
Airtec are proud to announce the latest intercooler for the mk1 Mazda 3 MPS.
 
Airtec have now added a great addition to its growing range of performance intercoolers. In the way of this huge front mount intercooler for the Mazda 3 MPS mk1.
A much needed upgrade for your re-mapped Mazda MPS.
1 x Huge 70mm core with flowed cast end tanks, This means less welding and a stronger intercooler
High quality silicone hoses which mean better flow inside the pipework, Finished with stainless jubilee clips.
Retains original crash bar
No cutting to bumper needed
Retains fog lights
fitting instructions and all required fittings supplied
Proven power increase on road and track use
Available in satin black or natural silver
Airtec 3 year unlimited mileage warranty
Fitting will take 2-3 hours depending on mechanical skill
Approximate Dimensions
 
Width – 740mm ( not including pipe )
Height – 170mm
Thick – 70mm
 
Test results taken @ AMD on 01,02,17 ( The car tested had a stage 1 re-map, K&N induction kit, cat back exhaust and of course our Airtec front mount intercooler kit  )
Test results – Standard oem intercooler measured temperatures going in to and out of intercooler
Inlet temp ( Going in to intercooler from turbo )
Run 1, 114 degree’s
Outlet temp ( Coming out of intercooler in to inlet manifold )
56 degree’s
Run 2,
Inlet, 115 degree’s
Outlet, 61 degree’s
Run 3,
Inlet 118 degree’s
Outlet, 64 degree’s
 
No more runs were carried out on the oem intercooler due to high intake temp’s so we stopped to avoid any damage.
Test results – Airtec intercooler upgrade measured temperatures going in to and out of intercooler
Act drops  ( air charge temperature )
Inlet temp ( Going in to intercooler from turbo )
Run 1, 112 degree’s
Outlet temp ( Coming out of intercooler in to inlet manifold )
37 degree’s
Run 2,
Inlet, 116 degree’s
Outlet, 39 degree’s
Run 3,
Inlet 116 degree’s
Outlet, 39 degree’s
 
That’s a 77 degree drop in temp’s ! And consistent temperature drop throughout all 3 runs
 
AIRTEC part number: ATINTMAZ01